Home / Equipment / Graders & scrapers
Grader and scraper transport, long loads.
Graders and scrapers are long machines that bend in the middle. The moldboard, the bowl and the tires decide the width; the length decides how the trailer is set up. Most travel oversize.
24/7 Shipping Inc. is a licensed freight broker, MC 1629455. We arrange your move with vetted carriers.

- Usual trailer
- Lowboy / RGN, often extendable
- Permit?
- Usually, for width or length
- Loads by
- Driving on over the RGN front
- We need
- Make, model, moldboard, ripper, push block
To quote it right
What we ask you
- Make and model. We look up shipping size and weight from that.
- Grader: moldboard length, front blade or front push block, rear ripper.
- Scraper: open bowl or elevating, single or twin engine, push-pull hitch.
- Is the articulation lock with it? It has to be pinned for the trip.
- Does it start, drive and steer? These are hard to winch, so tell us early if it does not run.
- Pickup site, delivery site, and room for a long truck and trailer to get in and out.
Not sure of the moldboard length? A photo from the front with the blade straight is enough.
On the road
How it moves
Motor graders
The moldboard is turned in line with the frame and lowered to cut width. Even so, many graders are past 8 ft 6 in wide and long enough to need an extendable trailer, so they run with permits.
Wheel tractor scrapers
The bowl and the big tires make scrapers wide and heavy. They ride a lowboy or RGN, often with extra axles and an overweight permit. The largest ship in pieces.
Pull scrapers
Tow-behind scrapers have no engine. They are lifted or pulled on and travel on a step deck or lowboy depending on height and width.
Locks and tie-down
The frame is pinned so it cannot fold, the blade or bowl is lowered to the deck, and the machine is chained at four or more points. The carrier secures it; we check it was done.
The number
What changes the price
We quote one all-in number. These are the things that move it.
- Distance, and the empty miles to reach you.
- Width and length permits in every state crossed.
- Escort cars, which some states require for long or wide loads.
- Weight. Scrapers can need extra axles and an overweight permit.
- How flexible your dates are.
Questions
Straight answers
Does a motor grader need an oversize permit?
Most do. Even with the moldboard turned in, many graders are wider than 8 ft 6 in, and their length can need an extendable trailer. The carrier pulls the permits and we include them in your quote.
How is a scraper shipped?
A motor scraper drives onto a lowboy or RGN, the bowl is lowered and the frame locked. Most are wide and heavy enough for permits. Pull scrapers are lifted or pulled onto a step deck or lowboy.
Can you pick up a grader from an auction?
Yes. Send the lot number and your paid release. Yards will not load without it, and most charge storage after the removal deadline.
Who is responsible for the machine on the road?
The motor carrier hauling it, under its cargo insurance. We are the broker: we choose the carrier, check its authority and insurance before booking, and follow the load to delivery.
Got a machine to move?
Tell us what it is and where it is going. A person answers, asks the right questions once, and gives you one number.